[PATCH v2 5/5] [RFC] omapdss: remove FEAT_DPI_USES_VDDS_DSI from omap3

Hello Christoph,

On 01/22/2014 04:04 PM, Christoph Fritz wrote:

DBB056 doesn't use DSI for its display, but omap3 forces this
erroneously for all its boards:

  | OMAP DSS rev 2.0
  | omapdss DPI error: can't get VDDS_DSI regulator
  | omapfb omapfb: failed to connect default display
  | omapfb omapfb: failed to init overlay connections
  | omapfb omapfb: failed to setup omapfb
  | platform omapfb: Driver omapfb requests probe deferral

So this patch just disables it for omap3. Consider this as a hack!
Is there a proper fix for this issue?

It is also a hack but I solved on the IGEPv2 board by adding a regulator-name =
"vdds_dsi" to the VPLL2 regulator as suggested by Tony.

Look at commit 2f2befd8 ("ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator
as vdds_dsi")

Having the workaround in the Device Tree is better IMHO since this is a
per-board configuration. That can be later removed once the DSS DT bindings are
added to mainline.

Thanks a lot and best regards,
Javier