[PATCH v3 1/2] ohci-platform: Add support for devicetree instantiation

Hi,

On 01/09/2014 09:14 PM, Sergei Shtylyov wrote:

Hello.

On 01/09/2014 08:57 PM, Hans de Goede wrote:

quoted

Add support for ohci-platform instantiation from devicetree, including
optionally getting clks and a phy from devicetree, and enabling / disabling
those on power_on / off.

quoted

This should allow using ohci-platform from devicetree in various cases.
Specifically after this commit it can be used for the ohci controller found
on Allwinner sunxi SoCs.

quoted

Signed-off-by: Hans de Goede <redacted>
---
  .../devicetree/bindings/usb/mmio-ohci.txt          |  22 +++
  drivers/usb/host/ohci-platform.c                   | 150 ++++++++++++++++++---
  2 files changed, 152 insertions(+), 20 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/usb/mmio-ohci.txt

quoted

diff --git a/Documentation/devicetree/bindings/usb/mmio-ohci.txt b/Documentation/devicetree/bindings/usb/mmio-ohci.txt
new file mode 100644
index 0000000..9c776ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mmio-ohci.txt

@@ -0,0 +1,22 @@
+Generic MMIO OHCI controller

    OHCI controller always uses MMIO, and likewise EHCI. You don't need to specifically mention it.

Right, I'm only using it here because it is also used in the compatible string.

quoted

+
+Required properties:
+- compatible : "mmio-ohci"

    Likewise, it's not a good name. Why not call it "platform-ohci"?

Because, as you would have known had you read the entire thread, people objected
against exactly that name because the "platform" bus thing is a Linux invention,
and other operating systems don't use the platform nomenclature for non pci
busses.

Regards,

Hans