[PATCH v5 8/8] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
From: mark.rutland@arm.com (Mark Rutland)
Date: 2014-01-24 11:09:49
Also in:
linux-devicetree, lkml
On Wed, Jan 22, 2014 at 03:30:52AM +0000, Marc Carino wrote:
quoted hunk ↗ jump to hunk
Add a sample DTS which will allow bootup of a board populated with the BCM7445 chip. Signed-off-by: Marc Carino <redacted> Acked-by: Florian Fainelli <f.fainelli@gmail.com> --- arch/arm/boot/dts/bcm7445.dts | 111 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 111 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/bcm7445.dtsdiff --git a/arch/arm/boot/dts/bcm7445.dts b/arch/arm/boot/dts/bcm7445.dts new file mode 100644 index 0000000..ffa3305 --- /dev/null +++ b/arch/arm/boot/dts/bcm7445.dts@@ -0,0 +1,111 @@ +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Broadcom STB (bcm7445)"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + interrupt-parent = <&gic>; + + chosen {}; + + memory { + device_type = "memory"; + reg = <0x00 0x00000000 0x00 0x40000000>, + <0x00 0x40000000 0x00 0x40000000>, + <0x00 0x80000000 0x00 0x40000000>; + };
As I commented on v3 [1], these are contiguous and can be described with
a single entry:
memory {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0xc0000000>;
};
Is there any reason to have three entries?
Thanks,
Mark.
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-January/225899.html