[PATCH 11/21] ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS
From: Simon Horman <hidden>
Date: 2013-12-24 14:19:34
Also in:
linux-sh
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Copy the device nodes from Koelsch reference into the Koeslch device tree file. This will allow us to use a single DTS file regarless of kernel configuration. In case of legacy C board code the device nodes may or may not be used, but in the multiplatform case all the DT device nodes are used. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <redacted> --- arch/arm/boot/dts/r8a7791-koelsch.dts | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index c4e8b3a..d431f31 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts@@ -11,6 +11,7 @@ /dts-v1/; #include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Koelsch";
@@ -29,4 +30,32 @@ #address-cells = <1>; #size-cells = <1>; }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + }; + led7 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + }; + led8 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pfc { + pinctrl-0 = <&scif0_pins &scif1_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; };
--
1.8.4