[PATCH] ARM: dts: imx6qdl-sabresd: Add power key support
From: Shawn Guo <hidden>
Date: 2013-12-19 06:08:21
Also in:
linux-devicetree
On Thu, Dec 19, 2013 at 12:25:34PM -0500, Anson Huang wrote:
quoted hunk
This patch adds support for imx6qdl-sabresd board's power key, the key is named "SW1" on board, press it can wake up system from suspend. Signed-off-by: Anson Huang <redacted> --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index e75e11b..85e3487 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi@@ -47,6 +47,13 @@ gpio-keys { compatible = "gpio-keys"; + power { + label = "Power Button"; + gpios = <&gpio3 29 0>; + linux,code = <116>; /* KEY_POWER */
The patch looks good. But I want to ask for more. - Move linux,code to the bottom, so that it follows the order used in volume-up and volume-down. - Replace magic number 116 with macro KEY_POWER defined in include/dt-bindings/input/input.h, as well as the numbers in volume-up and volume-down. - Create a pinctrl entry in gpio-keys node, and move the following out from pinctrl_hog into there. MX6QDL_PAD_EIM_D29__GPIO3_IO29 MX6QDL_PAD_GPIO_4__GPIO1_IO04 MX6QDL_PAD_GPIO_5__GPIO1_IO05 Shawn
quoted hunk
+ gpio-key,wakeup; + }; + volume-up { label = "Volume Up"; gpios = <&gpio1 4 0>;@@ -182,6 +189,7 @@ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 >; }; };-- 1.7.9.5