[PATCH 2/4] ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode
From: Shawn Guo <hidden>
Date: 2013-12-13 08:39:17
Also in:
linux-devicetree
On Thu, Dec 12, 2013 at 02:27:58PM +0100, Lothar Wa?mann wrote:
quoted hunk
This will be used by the TX6 modules from Ka-Ro electronics. Signed-off-by: Lothar Wa?mann <redacted> --- arch/arm/boot/dts/imx6qdl-pingrp.h | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-)diff --git a/arch/arm/boot/dts/imx6qdl-pingrp.h b/arch/arm/boot/dts/imx6qdl-pingrp.h index 8d71b13..4932249 100644 --- a/arch/arm/boot/dts/imx6qdl-pingrp.h +++ b/arch/arm/boot/dts/imx6qdl-pingrp.h@@ -100,6 +100,17 @@ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 \ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 +#define MX6QDL_ENET_PINGRP4 \
The '\' should just be after MX6QDL_ENET_PINGRP4 with a space in between. I just fixed it up and applied the first 3 patches. Shawn
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 \ + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 \ + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 \ + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 \ + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 \ + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 \ + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 \ + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 \ + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + #define MX6QDL_ESAI_PINGRP1 \ MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030 \ MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 \ -- 1.7.2.5