On Sun, Dec 15, 2013 at 2:13 PM, Sekhar Nori [off-list ref] wrote:

On Thursday 21 November 2013 11:45 PM, Prabhakar Lad wrote:

quoted

From: KV Sujith <redacted>

quoted

+
+                     gpio_pins: pinmux_gpio_pins {
+                             pinctrl-single,bits = <
+                                     /* GPIO2_4 GPIO2_6 */
+                                     0x18 0x00008080 0x0000f0f0
+                                     /* GPIO2_8 GPIO2_15 */
+                                     0x14 0x80000008 0xf000000f
+                                     /* GPIO3_12 GPIO3_13 */
+                                     0x1C 0x00008800 0x0000ff00
+                                     /* GPIO4_0 GPIO4_1 */
+                                     0x28 0x88000000 0xff000000
+                                     /* GPIO6_9 GPIO6_10 GPIO6_13 */
+                                     0x34 0x08800800 0x0ff00f00
+                             >;
+                     };
              };

Shouldn't these pinmux entries be part of actual device
node which needs them to be muxed this way?

The usual way to do it is to set up as states for the device,
or as a hog (on the pin controller itself).

Yours,
Linus Walleij