[PATCH v4 0/6] ARM: at91: use new at91 clks for samad3 SoCs

Hello,

This patch series moves sama5d3 SoCs and boards to the new at91 clk framework
(based on common clk framework).

Best Regards,

Boris

Changes since v3:
 - fix prog clks declaration

Changes since v2:
 - rework dt bindings:
   * replace "atmel,clk-id" property by the standard "reg" property
   * reference system, peripheral and programmable clks using the direct
     clk node instead of the parent node plus a clk id
 - add usb_clk to usb ehci controller node

Changes since v1:
 - remove references to peripheral id macros
 - remove old clk definitions after moving to new clk framework

Boris BREZILLON (6):
  ARM: at91: prepare sama5 dt boards transition to common clk
  ARM: at91: prepare common clk transition for sama5d3 SoC
  ARM: at91/dt: define sama5d3 clocks
  ARM: at91/dt: define sama5d3xek's main clk frequency
  ARM: at91: move sama5d3 SoC to common clk
  ARM: at91/dt: remove old clk material

 arch/arm/boot/dts/sama5d3.dtsi      |  379 ++++++++++++++++++++++++++++++++++-
 arch/arm/boot/dts/sama5d3_can.dtsi  |   20 ++
 arch/arm/boot/dts/sama5d3_emac.dtsi |   11 +
 arch/arm/boot/dts/sama5d3_gmac.dtsi |   11 +
 arch/arm/boot/dts/sama5d3_lcd.dtsi  |   17 ++
 arch/arm/boot/dts/sama5d3_mci2.dtsi |   12 ++
 arch/arm/boot/dts/sama5d3_tcb1.dtsi |   12 ++
 arch/arm/boot/dts/sama5d3_uart.dtsi |   21 ++
 arch/arm/boot/dts/sama5d3xcm.dtsi   |   17 +-
 arch/arm/mach-at91/Kconfig          |    1 -
 arch/arm/mach-at91/board-dt-sama5.c |   10 +-
 arch/arm/mach-at91/sama5d3.c        |  342 -------------------------------
 12 files changed, 497 insertions(+), 356 deletions(-)

-- 
1.7.9.5