[PATCH v3 7/9] phy: add Broadcom Kona USB2 PHY DT binding

On Tue, Nov 26, 2013 at 04:01:05PM +0530, Kishon Vijay Abraham I wrote:

Hi,

On Monday 25 November 2013 11:46 PM, Matt Porter wrote:

quoted

Add a binding that describes the Broadcom Kona USB2 PHY found
on the BCM281xx family of SoCs.

Signed-off-by: Matt Porter <redacted>
---
 .../devicetree/bindings/phy/bcm-kona-usb2-phy.txt         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
new file mode 100644
index 0000000..3dc8b3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt

you should name this bcm-phy. Then you can add binding info of all (future) PHY
IP from broadcom here.

other than that this looks fine..

Ok, sounds reasonable. I've noticed that convention with the TI USB
bindings...I'll do the same.

Acked-by: Kishon Vijay Abraham I <redacted>

Thanks
Kishon