[PATCH 8/9] ARM: at91/dt: add new at91rm9200ek_mmc board

On 17:31 Wed 20 Nov     , boris brezillon wrote:

On 20/11/2013 16:02, Jean-Christophe PLAGNIOL-VILLARD wrote:

quoted

On 14:37 Wed 28 Aug     , Boris BREZILLON wrote:

quoted

Add a new at91rm9200ek_mmc board (based on at91rm9200ek board) which enables
mmc0/slot0.

no for multiple dts

this need to handle at user space level

You mean, by controlling the regulator using the sysfs interface, or
by loading
only the appropriate driver ?

load the partial dts via userspace

What if both drivers are loaded (or not compiled as modules) ?
This will lead to one device being unusable (and maybe even worst)...

this will never be the case

Best Regards,
J.

Please explain what you had in mind ?

quoted

Best Regards,
J.

quoted

Signed-off-by: Boris BREZILLON <redacted>
---
 arch/arm/boot/dts/at91rm9200ek_mmc.dts |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 arch/arm/boot/dts/at91rm9200ek_mmc.dts

diff --git a/arch/arm/boot/dts/at91rm9200ek_mmc.dts b/arch/arm/boot/dts/at91rm9200ek_mmc.dts
new file mode 100644
index 0000000..c87a861
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200ek_mmc.dts

@@ -0,0 +1,23 @@
+/*
+ * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit with
+ *                    an MMC slot
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91rm9200ek.dts"
+
+/ {
+	model = "Atmel AT91RM9200 evaluation kit with MMC slot";
+	compatible = "atmel,at91rm9200ek-mmc", "atmel,at91rm9200ek", "atmel,at91rm9200";
+
+	ahb {
+		apb {
+			mmc0: mmc at fffb4000 {
+				status = "okay";
+			};
+		};
+	};
+};

-- 
1.7.9.5