[PATCH v5 0/4] Add I2C support to ST SoCs

Hi Wolfram,

On 10/14/2013 02:46 PM, Maxime COQUELIN wrote:

The goal of this series is to add I2C support to ST SoCs.
The DT definition is added for STiH415 and STiH416 SoCs on
B2000 and B2020 boards.

The series has been tested working on STiH416-B2020 board.
It applies on top of v3.12-rc5.

Changes since v4:
   - Fixed IRQ flags to level high triggering as reported by Stephen Gallimore
   - Revert back to generic DT properties for Anti-glitch filtering. Their DT
     binding documentation will be updated when i2c DT binding docuementation
     will be created (In Wolfram's ToDo list)

Do you agree with this approach?

Did you had time to review the driver?

Regards,
Maxime

...

Maxime Coquelin (4):
   i2c: busses: i2c-st: Add ST I2C controller
   ARM: STi: Supply I2C configuration to STiH416 SoC
   ARM: STi: Supply I2C configuration to STiH415 SoC
   ARM: STi: Add I2C config to B2000 and B2020 boards

  Documentation/devicetree/bindings/i2c/i2c-st.txt |   38 +
  arch/arm/boot/dts/stih415-pinctrl.dtsi           |   36 +
  arch/arm/boot/dts/stih415.dtsi                   |   53 ++
  arch/arm/boot/dts/stih416-pinctrl.dtsi           |   35 +
  arch/arm/boot/dts/stih416.dtsi                   |   53 ++
  arch/arm/boot/dts/stih41x-b2000.dtsi             |    9 +
  arch/arm/boot/dts/stih41x-b2020.dtsi             |   22 +
  drivers/i2c/busses/Kconfig                       |   10 +
  drivers/i2c/busses/Makefile                      |    1 +
  drivers/i2c/busses/i2c-st.c                      |  867 ++++++++++++++++++++++
  10 files changed, 1124 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-st.txt
  create mode 100644 drivers/i2c/busses/i2c-st.c