This series adds support for the Kona I2C bus found on Broadcom mobile
SoCs like the bcm11351 (aka bcm281xx) and enables it on the bcm28155-ap
board.
It depends upon the following commits:
https://lkml.org/lkml/2013/10/7/481
http://www.spinics.net/lists/arm-kernel/msg274964.html
Tim Kryger (4):
i2c: i2c-bcm-kona: Introduce Broadcom I2C Driver
i2c: i2c-bcm-kona: Add support for high-speed mode
ARM: dts: bcm281xx: Add i2c busses
ARM: dts: bcm28155-ap: Enable all the i2c busses
.../devicetree/bindings/i2c/i2c-bcm-kona.txt | 30 +
arch/arm/boot/dts/bcm11351.dtsi | 40 +
arch/arm/boot/dts/bcm28155-ap.dts | 20 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-bcm-kona.c | 936 +++++++++++++++++++++
6 files changed, 1037 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-bcm-kona.txt
create mode 100644 drivers/i2c/busses/i2c-bcm-kona.c
--
1.8.0.1