[PATCH 07/20] Documentation: dt: iio: Add binding for LPS001WP

On 10/01/13 22:09, Jonathan Cameron wrote:

On 09/16/13 17:02, Lee Jones wrote:

quoted

LPS001WP is a Pressure and Temperature sensor.

Cc: devicetree at vger.kernel.org
Signed-off-by: Lee Jones <redacted>

Hi Lee,

I'm planning to drop this set of bindings in favour of the unified ones
proposed by Lukasz Czerwinski.

Sorry, I just realised this is unclear.  I'm proposing to drop the
documentation added in this patch in favour of the other version
in which a file per type of sensor is used rather than one per
individual sensor chip.

Could you take a look at those and perhaps propose the additional bits and pieces
needed to ensure everything is covered by the resulting files?

Thanks,

Jonathan

quoted

---
 .../devicetree/bindings/iio/pressure/lps001wp.txt   | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/lps001wp.txt

diff --git a/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
new file mode 100644
index 0000000..45cb45c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt

@@ -0,0 +1,21 @@
+* STMicroelectronics Pressure Sensor
+
+Required properties:
+  - compatible: Should be "st,lps001wp"
+  - reg: The I2C address of the sensor
+
+Optional properties:
+  - vdd-supply: Phandle to the Vdd supply regulator
+  - vddio-supply: Phandle to the Vdd-IO supply regulator
+
+Example:
+
+i2c at 80128000 {
+        lps001wp at 5c {
+                compatible = "st,lps001wp";
+                reg = <0x5c>;
+
+                vdd-supply = <&ab8500_ldo_aux1_reg>;
+                vddio-supply = <&db8500_vsmps2_reg>;
+        };
+};

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html