[PATCH 3/7] misc: ixp4-beeper: use gpiolib strictly
From: acourbot@nvidia.com (Alex Courbot)
Date: 2013-09-11 01:58:05
Also in:
linux-gpio
On 09/10/2013 09:30 PM, Linus Walleij wrote:
quoted hunk ↗ jump to hunk
Request and free the GPIO line used for the beeper properly. Then use the gpiolib API to flip the output of the GPIO pin instead of relying on hacks to poke the register bits. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <redacted> --- Arnd/Greg: seeking your ACK to take this through the GPIO tree as part of the attempt at cleaning out custom GPIO implementations. --- drivers/input/misc/ixp4xx-beeper.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index f14afd0..fb3bec5 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c@@ -76,11 +76,13 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id) { + unsigned int pin = (unsigned int) dev_id; + /* clear interrupt */ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND; /* flip the beeper output */ - *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id); + gpio_set_value(pin, ~gpio_get_value(pin));
Don't you want gpio_set_value(pin, !gpio_get_value(pin)); instead? From the deleted line I suppose you guess to invert the GPIO value, but using ~ will invert all the bits of the integer returned by gpio_get_value(), meaning that if it returns 1 you will end up calling gpio_set_value(-2). In practice your gpio is very unlikely to ever be set to 0.
quoted hunk ↗ jump to hunk
return IRQ_HANDLED; }@@ -108,11 +110,15 @@ static int ixp4xx_spkr_probe(struct platform_device *dev) input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE); input_dev->event = ixp4xx_spkr_event; + err = gpio_request(dev->id, "ixp4-beeper"); + if (err) + goto err_free_device; + err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt, IRQF_NO_SUSPEND, "ixp4xx-beeper", (void *) dev->id); if (err) - goto err_free_device; + goto err_free_gpio; err = input_register_device(input_dev); if (err)@@ -124,6 +130,8 @@ static int ixp4xx_spkr_probe(struct platform_device *dev) err_free_irq: free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id); + err_free_gpio: + gpio_free(dev->id); err_free_device: input_free_device(input_dev);@@ -142,6 +150,7 @@ static int ixp4xx_spkr_remove(struct platform_device *dev) ixp4xx_spkr_control(pin, 0); free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id); + gpio_free(dev->id);
Just wondering, is there a reason for not using the devm_gpio functions here?
return 0; }