[PATCH 0/3 v2] clk: keystone: Add common clock drivers

Mike,

On Thursday 29 August 2013 03:14 PM, Santosh Shilimkar wrote:

v2:
- Aligned the bindings as per the list discussion. Removed the additional
	parameters by usage of reg-names and additional compatible fields.
- Addressed all the comments from v1 on drivers.
- Split the series into clock drivers($subject series) and
	platform, dt updates. Will post that one separately.

Special thanks to Mike and Mark for the detailed review on v1.

Series is an attempt to add the clock drivers for Keystone SOCs
based on common clock framework. A PLL drivers taking care of
SOC PLLs and a gate control driver taking clock management for
the IPs. The current Keystone based SOCs don' support dynamic power
management usecases like DVFS, SOC ilde etc and hence most of the
usage is limited to enabling clocks and finding the current clock
rate etc.

Based on to of Mike's dt binding series [1] and tested on Keystone2
EVM.

Cc: Mike Turquette <redacted>

As aligned off-list, I will revise the series to remove the
dependency with your DT bindings series which still seems to
be under discussion.

Regards,
Santosh