[net-next PATCH 3/4] drivers: net: cpsw: use cpsw-phy-sel driver to configure phy mode
From: Mugunthan V N <hidden>
Date: 2013-09-20 19:20:40
Also in:
linux-devicetree, linux-omap, netdev
Subsystem:
networking drivers, the rest, ti ethernet switch driver (cpsw) · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Phy mode can be configured via the cpsw-phy-sel driver, this patch enabled the cpsw driver to utilise the api provided by the cpsw-phy-sel driver to configure the phy mode. Signed-off-by: Mugunthan V N <redacted> Tested-by: Daniel Mack <zonque@gmail.com> --- drivers/net/ethernet/ti/cpsw.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 01c42e1..5efb37b 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c@@ -1021,6 +1021,10 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) dev_info(priv->dev, "phy found : id is : 0x%x\n", slave->phy->phy_id); phy_start(slave->phy); + + /* Configure GMII_SEL register */ + cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, + slave->slave_num); } }
--
1.8.4