On Sat, Sep 21, 2013 at 02:27:18PM +0200, Pavel Machek wrote:

Hi!

quoted

quoted

quoted

This is a follow-up on a previous patch set that had a smaller
audience.  This time, I added the lists and people who were involved
in the review of the bindings documentation, since most of my changes
in v2 are coming from discussions there.

This patch series adds device tree support to the wlcore_sdio driver,
which is used by WiLink6, WiLink7 and WiLink8.

Could you perhaps consider doing device tree conversion for wl1251
too? With the knowledge you have from working on this series, it would
be much easier for you to do it than for someone else, and I don't
have much hope someone will do it at all. It's WiLink series chip
after all. Without this pandora and N900 are going to lose wifi
support after the switch to dt-only kernel.

Unfortunately I don't have much time to work on wl1251.  I think it
wouldn't be too difficult to do though, so patches are welcome. ;)

Maybe you could try to make this change and I could support you if
needed?

quoted

I can offer you my help testing things on pandora and I'm sure someone
here could try it on N900.

I could try it on the N900, if it is still bootable easily with the
mainline. ;)

3.11 should be bootable on mainline, including device tree and
video. (But excluding some other stuff, like MMC.)

I got external MMC (=> ?SD) working with some small modifications of
the omap3-n900.dts file. I have not yet tried internal MMC, since
its not important for me at the moment, but I guess its also just a
small change in the dts file.

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130921/a6c98946/attachment.sig>