Op 9 sep. 2013, om 16:15 heeft Felipe Balbi [off-list ref] het volgende geschreven:

Hi,

On Mon, Sep 09, 2013 at 03:45:50PM +0200, Koen Kooi wrote:

quoted

The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added,
so create a common dtsi both can use.

IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver 
after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead
of 1.8. 

MMC support for AM335x still isn't in, so only the LDO change has been added.

Signed-off-by: Koen Kooi <redacted>
Tested-by: Tom Rini <redacted>
Tested-by: Matt Porter <redacted>

not entirelly related to $SUBJECT but having HDMI listed in BBB DTS will
prevent the use of RF cape, no ?

Complete and utter lack of software from TI for the RF cape is preventing the RF cape from working regardless of HDMI entries.