[PATCH 01/15] watchdog: orion: Remove unneeded BRIDGE_CAUSE clear
From: Ezequiel Garcia <hidden>
Date: 2013-08-27 14:34:25
Subsystem:
the rest, watchdog device drivers · Maintainers:
Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
With the introduction of the orion irqchip driver, now the BRIDGE_CAUSE bit is cleared by it. There's no longer a need to do it in the watchdog driver, so we can simply remove it. Signed-off-by: Ezequiel Garcia <redacted> --- drivers/watchdog/orion_wdt.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 4ea5fcc..74d3b72 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c@@ -39,7 +39,6 @@ #define WDT_OK_TO_CLOSE 1 #define WDT_RESET_OUT_EN BIT(1) -#define WDT_INT_REQ BIT(3) static bool nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = -1; /* module parameter (seconds) */
@@ -69,9 +68,6 @@ static int orion_wdt_start(struct watchdog_device *wdt_dev) /* Set watchdog duration */ writel(wdt_tclk * wdt_dev->timeout, wdt_reg + WDT_VAL); - /* Clear watchdog timer interrupt */ - writel(~WDT_INT_REQ, BRIDGE_CAUSE); - /* Enable watchdog timer */ reg = readl(wdt_reg + TIMER_CTRL); reg |= WDT_EN;
--
1.8.1.5