[PATCHv1] arm: armada: Add .dts file for Netgear ReadyNAS 102

Hi Jason and Gregory,

Jason Cooper [off-list ref] writes:

On Mon, Aug 05, 2013 at 03:25:21PM +0200, Gregory CLEMENT wrote:

quoted

On 04/07/2013 23:16, Arnaud Ebalard wrote:

quoted

All hardware parts of the (Armada 370 based) NETGEAR ReadyNAS 102 are
supported by mainline kernel (USB 3.0 rear ports, USB 2.0 front port,
Gigabit controller and PHY, serial port, leds, buttons, SATA ports,
G762 fan controller) except for:

 - the Intersil ISL12057 I2C RTC Chip,
 - the Armada NAND controller.

Support for both of those is currently work in progress and does not
prevent boot.

If it is not too late you can add my

Acked-by: Gregory CLEMENT <redacted>

Added.

quoted

Just a nitpick:

For a better coherency in your file you could add an extra line before
each sub-node as you have done for all the other nodes:

fixed.

Thank you guys for resurrecting the thread. I was kind of waiting some
more days for some feedback on ISL 12057 RTC chip driver from rtc-linux
group. It now seems unlikely the driver will be in 3.12 so let's leave
the .dts as is. I'll push an update for the .dts file to reference the
device for 3.13-rc* cycle.

Cheers,

a+