Thread (15 messages) 15 messages, 7 authors, 2013-09-13

[PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard

From: javier@dowhile0.org (Javier Martinez Canillas)
Date: 2013-08-06 14:01:53
Also in: linux-arm-msm, lkml

On Tue, Aug 6, 2013 at 1:02 AM, Rohit Vaswani [off-list ref] wrote:
quoted hunk ↗ jump to hunk
This patch adds basic board support for MSM8974 Dragonboard
which belongs to the Snapdragon 800 family.
For now, just support a basic machine with device tree.

Signed-off-by: Rohit Vaswani <redacted>
---
 arch/arm/boot/dts/Makefile        |  3 ++-
 arch/arm/boot/dts/msm8974-db.dts  | 26 ++++++++++++++++++++++++++
 arch/arm/mach-msm/Kconfig         | 21 ++++++++++++++++++---
 arch/arm/mach-msm/Makefile        |  1 +
 arch/arm/mach-msm/board-dt-8974.c | 23 +++++++++++++++++++++++
 5 files changed, 70 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/boot/dts/msm8974-db.dts
 create mode 100644 arch/arm/mach-msm/board-dt-8974.c
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9a..62cea36 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -97,7 +97,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
        kirkwood-openblocks_a6.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
-       msm8960-cdp.dtb
+       msm8960-cdp.dtb \
+       msm8974-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
        armada-370-mirabox.dtb \
        armada-370-rd.dtb \
diff --git a/arch/arm/boot/dts/msm8974-db.dts b/arch/arm/boot/dts/msm8974-db.dts
new file mode 100644
index 0000000..badfc61
--- /dev/null
+++ b/arch/arm/boot/dts/msm8974-db.dts
@@ -0,0 +1,26 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+       model = "Qualcomm MSM8974 Dragonboard";
+       compatible = "qcom,msm8974-db", "qcom,msm8974";
+       interrupt-parent = <&intc>;
+
+       intc: interrupt-controller at f9000000 {
+               compatible = "qcom,msm-qgic2";
+               interrupt-controller;
+               #interrupt-cells = <3>;
+               reg = < 0xf9000000 0x1000 >,
+                     < 0xf9002000 0x1000 >;
+       };
+
+       timer {
+               compatible = "arm,armv7-timer";
+               interrupts = <1 2 0xf08>,
+                            <1 3 0xf08>,
+                            <1 4 0xf08>,
+                            <1 1 0xf08>;
+               clock-frequency = <19200000>;
+       };
+};
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 614e41e..343675b 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,12 +1,12 @@
 if ARCH_MSM

 comment "Qualcomm MSM SoC Type"
-       depends on (ARCH_MSM8X60 || ARCH_MSM8960)
+       depends on ARCH_MSM_DT

 choice
        prompt "Qualcomm MSM SoC Type"
        default ARCH_MSM7X00A
-       depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
+       depends on !ARCH_MSM_DT

 config ARCH_MSM7X00A
        bool "MSM7x00A / MSM7x01A"
@@ -60,6 +60,19 @@ config ARCH_MSM8960
        select MSM_SCM if SMP
        select USE_OF

+config ARCH_MSM8974
+       bool "MSM8974"
+       select ARM_GIC
+       select CPU_V7
+       select HAVE_ARM_ARCH_TIMER
+       select HAVE_SMP
+       select MSM_SCM if SMP
+       select USE_OF
+
+config ARCH_MSM_DT
+       def_bool y
+       depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
+
 config MSM_HAS_DEBUG_UART_HS
        bool
@@ -68,6 +81,7 @@ config MSM_SOC_REV_A

 config  ARCH_MSM_ARM11
        bool
+
 config  ARCH_MSM_SCORPION
        bool
@@ -75,6 +89,7 @@ config  MSM_VIC
        bool

 menu "Qualcomm MSM Board Type"
+       depends on !ARCH_MSM_DT

 config MACH_HALIBUT
        depends on ARCH_MSM
@@ -121,7 +136,7 @@ config MSM_SMD
        bool

 config MSM_GPIOMUX
-       depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
+       depends on !ARCH_MSM_DT
        bool "MSM V1 TLMM GPIOMUX architecture"
        help
          Support for MSM V1 TLMM GPIOMUX architecture.
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index d257ff4..80e3b15 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -29,5 +29,6 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
 obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
 obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
+obj-$(CONFIG_ARCH_MSM8974) += board-dt-8974.o
 obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c
new file mode 100644
index 0000000..697623e
--- /dev/null
+++ b/arch/arm/mach-msm/board-dt-8974.c
@@ -0,0 +1,23 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+
+static const char * const msm8974_dt_match[] __initconst = {
+       "qcom,msm8974-db",
+       NULL
+};
+
+DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)")
+       .dt_compat = msm8974_dt_match,
+MACHINE_END
--
Hi Rohit,

I wonder if this arch/arm/mach-msm/board-dt-8974.c boad file is really
needed. I just noticed that already exist an
arch/arm/mach-msm/board-dt-8960.c and
arch/arm/mach-msm/board-dt-8660.c board files which doesn't seem to be
that different.

I'm not familiar with msm at all so maybe all these boards files are
needed. But one of the goals of having DeviceTree for ARM is to get
rid of all the board files so I don't think is a good idea to add a
board file for each DT added.

In OMAP for example we only have one board file that is used for DT
booting (arch/arm/mach-omap2/board-generic.c). These board file has a
struct machine_desc for each OMAP family which defines a dt_compact
for the family (i.e: ti,omap4).

Since the machine init is almost the same for each SoC in a given
family a board DTB can just define:

compatible = "foo,bard", "ti,omap3";

Since the compatible string is processed from specific to generic, a
board can define its own struct machine_desc in case it really needs
but it should just use the generic one in case it works for it.

Again, I'm not familiar with the Snapdragon 800 SoC family but maybe
you can do something similar to what we do in OMAP for this SoC
family.

Thanks a lot and best regards,
Javier
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help