@@ -45,11 +45,13 @@ For the ARM architecture every CPU node must contain the following properties:
 		"marvell,xsc3"
 		"marvell,xscale"
 		"qcom,scorpion"
+		"qcom,krait"
 - enable-method: Specifies the method used to enable or take the secondary cores
 		 out of reset. This allows different reset sequence for
 		 different types of cpus.
 		 This should be one of:
 		 "qcom,scss"
+		 "qcom,kpssv1"
 
 Example:
 

@@ -0,0 +1,16 @@
+* KPSS - Krait Processor Sub-system
+
+Properties
+
+- compatible : Should contain "qcom,kpss".
+
+- reg: Specifies the base address for the KPSS registers used for
+       booting up secondary cores.
+
+Example:
+
+	kpss at 2088000 {
+		compatible = "qcom,kpss";
+		reg = <0x02088000 0x1000
+			0x02098000 0x2000>;
+	};

@@ -7,6 +7,22 @@
 	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
 	interrupt-parent = <&intc>;
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "qcom,krait";
+		device_type = "cpu";
+		enable-method = "qcom,kpssv1";
+
+		cpu at 0 {
+			reg = <0>;
+		};
+
+		cpu at 1 {
+			reg = <1>;
+		};
+	};
+
 	intc: interrupt-controller at 2000000 {
 		compatible = "qcom,msm-qgic2";
 		interrupt-controller;

@@ -37,6 +53,12 @@
 		reg = <0xfd510000 0x4000>;
 	};
 
+	kpss at 2088000 {
+		compatible = "qcom,kpss";
+		reg = <0x02088000 0x1000
+			0x02098000 0x2000>;
+	};
+
 	serial at 16440000 {
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x16440000 0x1000>,

@@ -74,6 +74,56 @@ static int scorpion_release_secondary(void)
 	return 0;
 }
 
+static int msm8960_release_secondary(unsigned int cpu)
+{
+	void __iomem *reg;
+	struct device_node *dn = NULL;
+
+	if (cpu == 0 || cpu >= num_possible_cpus())
+		return -EINVAL;
+
+	dn = of_find_compatible_node(dn, NULL, "qcom,kpss");
+	if (!dn) {
+		pr_err("%s : Missing kpss node from device tree\n", __func__);
+		return -ENXIO;
+	}
+
+	reg = of_iomap(dn, cpu);
+	if (!reg)
+		return -ENOMEM;
+
+	pr_debug("Starting secondary CPU %d\n", cpu);
+
+	/* Turn on CPU Rail */
+	writel_relaxed(0xA4, reg+0x1014);
+	mb();
+	udelay(512);
+
+	/* Krait bring-up sequence */
+	writel_relaxed(0x109, reg+0x04);
+	writel_relaxed(0x101, reg+0x04);
+	mb();
+	ndelay(300);
+
+	writel_relaxed(0x121, reg+0x04);
+	mb();
+	udelay(2);
+
+	writel_relaxed(0x120, reg+0x04);
+	mb();
+	udelay(2);
+
+	writel_relaxed(0x100, reg+0x04);
+	mb();
+	udelay(100);
+
+	writel_relaxed(0x180, reg+0x04);
+	mb();
+
+	iounmap(reg);
+	return 0;
+}
+
 static DEFINE_PER_CPU(int, cold_boot_done);
 
 static void boot_cold_cpu(unsigned int cpu)

@@ -96,6 +146,11 @@ static void boot_cold_cpu(unsigned int cpu)
 			scorpion_release_secondary();
 			per_cpu(cold_boot_done, cpu) = true;
 		}
+	} else if (!strcmp(enable_method, "qcom,kpssv1")) {
+		if (per_cpu(cold_boot_done, cpu) == false) {
+			msm8960_release_secondary(cpu);
+			per_cpu(cold_boot_done, cpu) = true;
+		}
 	} else {
 		pr_err("%s: Invalid enable-method property: %s\n",
 				__func__, enable_method);

@@ -151,6 +206,8 @@ static void __init msm_smp_init_cpus(void)
 static const int cold_boot_flags[] __initconst = {
 	0,
 	SCM_FLAG_COLDBOOT_CPU1,
+	SCM_FLAG_COLDBOOT_CPU2,
+	SCM_FLAG_COLDBOOT_CPU3,
 };
 
 static void __init msm_smp_prepare_cpus(unsigned int max_cpus)

@@ -13,9 +13,11 @@
 #define __MACH_SCM_BOOT_H
 
 #define SCM_BOOT_ADDR			0x1
-#define SCM_FLAG_COLDBOOT_CPU1		0x1
-#define SCM_FLAG_WARMBOOT_CPU1		0x2
-#define SCM_FLAG_WARMBOOT_CPU0		0x4
+#define SCM_FLAG_COLDBOOT_CPU1		0x01
+#define SCM_FLAG_COLDBOOT_CPU2		0x08
+#define SCM_FLAG_COLDBOOT_CPU3		0x20
+#define SCM_FLAG_WARMBOOT_CPU0		0x04
+#define SCM_FLAG_WARMBOOT_CPU1		0x02
 
 int scm_set_boot_addr(phys_addr_t addr, int flags);