[PATCH 4/5] ARM: dts: imx6: add dte pinctrl for uart2
From: Huang Shijie <hidden>
Date: 2013-07-02 06:30:27
Also in:
linux-serial
Subsystem:
the rest · Maintainer:
Linus Torvalds
In arm2 board, the UART2 works in the dte mode. So add a pinctrl for it. Signed-off-by: Huang Shijie <redacted> --- arch/arm/boot/dts/imx6q.dtsi | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 9a69891..8a518c6 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi@@ -266,6 +266,15 @@ MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 >; }; + + pinctrl_uart2_dte: uart2grp-2 { + fsl,pins = < + MX6Q_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 + MX6Q_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 + MX6Q_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 + MX6Q_PAD_EIM_D29__UART2_CTS_B 0x1b0b1 + >; + }; }; uart4 {
--
1.7.1