[PATCH 5/8] arm: dts: add omap4430 thermal data
From: Eduardo Valentin <hidden>
Date: 2013-07-17 15:06:16
Also in:
linux-devicetree, linux-omap, linux-pm, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This patch changes the dtsi entry on omap4430 to contain the thermal data. This data will enable the passive cooling with CPUfreq cooling device at 100C and the system will do a thermal shutdown at 125C. Cc: "Beno?t Cousson" <redacted> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <redacted> Cc: linux-omap at vger.kernel.org Cc: devicetree-discuss at lists.ozlabs.org Cc: linux-arm-kernel at lists.infradead.org Cc: linux-kernel at vger.kernel.org Signed-off-by: Eduardo Valentin <redacted> --- arch/arm/boot/dts/omap443x.dtsi | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index bcf455e..c9a1c89 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi@@ -8,6 +8,7 @@ * kind, whether express or implied. */ +#include <dt-bindings/thermal/thermal.h> #include "omap4.dtsi" / {
@@ -26,8 +27,34 @@ }; bandgap { - reg = <0x4a002260 0x4 - 0x4a00232C 0x4>; + reg = <0x4a002260 0x4 0x4a00232C 0x4>; compatible = "ti,omap4430-bandgap"; + thermal_zone { + type = "CPU"; + mask = <0x03>; /* trips writability */ + passive_delay = <250>; /* milliseconds */ + polling_delay = <1000>; /* milliseconds */ + governor = "step_wise"; + trips { + alert at 100000{ + temperature = <100000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = <THERMAL_TRIP_PASSIVE>; + }; + crit at 125000{ + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = <THERMAL_TRIP_CRITICAL>; + }; + }; + bind_params { + action at 0{ + cooling_device = "thermal-cpufreq"; + weight = <100>; /* percentage */ + mask = <0x01>; + /* no limits, using defaults */ + }; + }; + }; }; };
--
1.8.2.1.342.gfa7285d