[PATCH v2 07/10] ARM: dts: Add initial device tree support for Exynos5420
DORMANTno replies
From: Chander Kashyap <hidden>
Date: 2013-06-17 11:08:55
Also in:
linux-samsung-soc, linux-serial
On 17 June 2013 14:22, Alim Akhtar [off-list ref] wrote:
Hi Chander and Mark On Mon, Jun 17, 2013 at 2:16 PM, Mark Rutland [off-list ref] wrote:quoted
Hi,quoted
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dtsb/arch/arm/boot/dts/exynos5420-smdk5420.dts new file mode 100644 index 0000000..43f0eb8--- /dev/null +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts@@ -0,0 +1,40 @@ +/* + * SAMSUNG SMDK5420 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5420.dtsi" + +/ { + model = "Samsung SMDK5420 board based on EXYNOS5420"; + compatible = "samsung,smdk5420", "samsung,exynos5420"; + + memory { + reg = <0x20000000 0x10000000 + 0x30000000 0x10000000 + 0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000 + 0x80000000 0x10000000 + 0x90000000 0x10000000>; + };As splitting these into 256MB banks is a workaround for an implementation issue, there should at least be a comment to that effect. It would be far nicer if this were described as one bank and the kernel could split it up as necessary when using sparsemem.Yes, I thing this is not needed at all, the bootloader should be setting this for us. Either remove this completly or just add as single bank of memory, like starting address and the size.
I will convert it to single bank and resend.
quoted
Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html-- Regards, Alim
-- with warm regards, Chander Kashyap