[PATCHv5 0/8] Add I2C support for Allwinner SoCs

Hi Wolfram,

On Fri, Jun 14, 2013 at 04:07:20PM +0200, Wolfram Sang wrote:

On Wed, Jun 12, 2013 at 06:53:29PM +0200, Maxime Ripard wrote:

quoted

Hi,

This patchset adds support for the I2C controller found on most of the
Allwinner SoCs, especially the already supported A10 and A13, and the
yet to come A31.

This driver leverages the Marvel mv64xxx i2c controller driver, that has
an almost identical logic, with a slightly different register layout.

\o/ Yay, that's more like it. Thanks for the rework!

quoted

It has been tested on a A13-Olinuxino and an A10s-Olinuxino.

I'd love to get some Tested-by or other tags for Marvell hardware. Any
volunteers?

Yes, I'd be more comfortable with Tested-by from Marvell users. I'll
probably be able to get my hands on a Marvell board on monday, if no one
tested it yet.

quoted

Changes from v4:
  * Don't expose the reg offset structure through the platform data

Commit message 2/9 still speaks about pdata, but I will fix this locally
if all goes well with this series.

I will wait a bit more for tags and then pick up patches 1-3. I assume
the rest goes via arm-soc, let me know if I should take them.

Yes, I'll take it in my tree and push it to arm-soc afterwards.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com