[PATCHv2 8/8] clocksource: sun4i: Fix bug when switching from periodic to oneshot modes
From: Maxime Ripard <hidden>
Date: 2013-06-28 19:58:12
Also in:
lkml
Subsystem:
clocksource, clockevent drivers, the rest · Maintainers:
Daniel Lezcano, Thomas Gleixner, Linus Torvalds
The interval was firing at was set up at probe time, and only changed in the set_next_event, and never changed back, which is not really what is expected. When enabling the periodic mode, now set an interval to tick every jiffy. Signed-off-by: Maxime Ripard <redacted> --- drivers/clocksource/sun4i_timer.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index a77fa29..a2a9088 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c@@ -39,6 +39,7 @@ #define TIMER_CNTVAL_REG(val) (0x10 * val + 0x18) static void __iomem *timer_base; +static u32 ticks_per_jiffy; static void sun4i_clkevt_time_stop(u8 timer) {
@@ -61,7 +62,8 @@ static void sun4i_clkevt_time_start(u8 timer, bool periodic) else val |= TIMER_CTL_ONESHOT; - writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer)); + writel(val | TIMER_CTL_ENABLE | TIMER_CTL_AUTORELOAD, + timer_base + TIMER_CTL_REG(timer)); } static void sun4i_clkevt_mode(enum clock_event_mode mode,
@@ -70,6 +72,7 @@ static void sun4i_clkevt_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: sun4i_clkevt_time_stop(0); + sun4i_clkevt_time_setup(0, ticks_per_jiffy); sun4i_clkevt_time_start(0, true); break; case CLOCK_EVT_MODE_ONESHOT:
@@ -144,10 +147,10 @@ static void __init sun4i_timer_init(struct device_node *node) panic("Can't get timer clock"); clk_prepare_enable(clk); - writel(clk_get_rate(clk) / HZ, - timer_base + TIMER_INTVAL_REG(0)); - writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M) | TIMER_CTL_AUTORELOAD, + ticks_per_jiffy = DIV_ROUND_UP(clk_get_rate(clk), HZ); + + writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M), timer_base + TIMER_CTL_REG(0)); ret = setup_irq(irq, &sun4i_timer_irq);
--
1.8.3.1