[PATCH v3 6/6] ARM: dts: imx6qdl: enable the WEIM NOR
From: s.hauer@pengutronix.de (Sascha Hauer)
Date: 2013-05-27 07:44:57
Also in:
linux-devicetree
In the subject: s/imx6qdl/imx6qdl-sabreauto/ Sascha On Fri, May 24, 2013 at 05:59:24PM +0800, Huang Shijie wrote:
quoted hunk
Enable the WEIM NOR for imx6q{dl} boards. For the pin conflict with SPI NOR, its status is set to "disabled". Signed-off-by: Huang Shijie <redacted> --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-)diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index a4466e6..bb0f185 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi@@ -58,3 +58,23 @@ wp-gpios = <&gpio1 13 0>; status = "okay"; }; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim_nor_1 &pinctrl_weim_cs_0>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x08000000>; + status = "disabled"; /* pin conflict with SPI NOR */ + + nor at 0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + + fsl,weim-cs-timing = <0x00620081 0x00000001 0x1C022000 + 0x0000C000 0x1404a38e 0x00000000>; + }; +};-- 1.7.1
-- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |