Hi Florian,

On Fri, May 24, 2013 at 10:42:30AM +0100, Florian Fainelli wrote:

Hello Maxime,

2013/5/24 Maxime Ripard [off-list ref]

quoted

This patch adds a separate driver for the MDIO interface of the
Allwinner ethernet controllers.

Signed-off-by: Maxime Ripard <redacted>
---
 .../bindings/net/allwinner,sun4i-mdio.txt          |  26 +++
 drivers/net/ethernet/allwinner/Kconfig             |   8 +
 drivers/net/ethernet/allwinner/Makefile            |   1 +
 drivers/net/ethernet/allwinner/sun4i-mdio.c        | 191 +++++++++++++++++++++

Ok, so you probably followed Thomas's example here with mvneta/mvmdio,
but all other MDIO bus drivers live in drivers/net/phy.

Indeed I shamelessly followed Thomas here.

Unfortunately, mvmdio lives in drivers/net/ethernet/marvell/mvmdio.c
which I should have noticed before. Whatever is good for you guys, but
we should probably start normalizing this now before more mdio drivers
get merged alongside their corresponding ethernet MAC users.

I'm fine with either way, just tell me where to put it and I'll happily
do so.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com