On Wednesday 08 May 2013, Srinivas KANDAGATLA wrote:

From: Srinivas Kandagatla <redacted>

This patch introduces syscon_claim, syscon_read, syscon_write,
syscon_release APIs to help drivers to use syscon registers in much more
flexible way.

With this patch, a driver can claim few/all bits in the syscon registers
and do read/write and then release them when its totally finished with
them, in the mean time if another driver requests same bits or registers
the API will detect conflit and return error to the second request.

Reason to introduce this API.
System configuration/control registers are very basic configuration
registers arranged in groups across ST Settop Box parts. These registers
are independent of IP itself. Many IPs, clock, pad and other functions
are wired up to these registers.

In many cases a single syconf register contains bits related to multiple
devices, and therefore it need to be shared across multiple drivers at
bit level. The same IP block can have different syscon mappings on
different SOCs.

Typically in a SOC there will be more than hundreds of these registers,
which are again divided into groups.

Signed-off-by: Srinivas Kandagatla <redacted>
CC: Stuart Menefy <redacted>

My feeling is that syscon is the wrong place for this functionality,
since regmap already handles (some of?) these issues. If you need
additional synchronization, it's probably best to extend regmap
as needed so other code besides syscon can take advantage of that
as well.

	Arnd