On Wednesday 08 May 2013, Srinivas KANDAGATLA wrote:

From: Stuart Menefy <redacted>

This is a simple driver for the global timer module found in the Cortex
A9-MP cores from revision r1p0 onwards. This should be able to perform
the functions of the system timer and the local timer in an SMP system.

The global timer has the following features:
    The global timer is a 64-bit incrementing counter with an
auto-incrementing feature. It continues incrementing after sending
interrupts. The global timer is memory mapped in the private memory
region.
    The global timer is accessible to all Cortex-A9 processors in the
cluster. Each Cortex-A9 processor has a private 64-bit comparator that
is used to assert a private interrupt when the global timer has reached
the comparator value. All the Cortex-A9 processors in a design use the
banked ID, ID27, for this interrupt. ID27 is sent to the Interrupt
Controller as a Private Peripheral Interrupt. The global timer is
clocked by PERIPHCLK.

Signed-off-by: Stuart Menefy <redacted>
Signed-off-by: Srinivas Kandagatla <redacted>

Are you sure we don't already have a driver for this? It sounds unlikely
that you are the first one to do this when the hardware is so common.

 Documentation/devicetree/bindings/arm/gt.txt |   21 ++
 arch/arm/Kconfig                             |    6 +
 arch/arm/include/asm/global_timer.h          |   12 +
 arch/arm/kernel/Makefile                     |    1 +
 arch/arm/kernel/global_timer.c               |  325 ++++++++++++++++++++++++++
 5 files changed, 365 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/gt.txt
 create mode 100644 arch/arm/include/asm/global_timer.h
 create mode 100644 arch/arm/kernel/global_timer.c

Move it into drivers/clocksource?
 

I don't see a need to call this from platform code for non-DT platforms, it
can easily be used with CLOCKSOURCE_OF_DECLARE() all the time I think.

	Arnd