v2 - after sdhci-pxav1 driver is merged with sdhci-pxav2, pass
     pxav1_controller = 1
   - as sdhci device numbering now starts from 1, call
     pxa168_add_sdh accordingly

Signed-off-by: Tanmay Upadhyay <redacted>
Reviewed-by: Philip Rakity <redacted>
---
 arch/arm/mach-mmp/gplugd.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 5c3d61e..d821368 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c

@@ -155,6 +155,11 @@ struct pxa168_eth_platform_data gplugd_eth_platform_data = {
        .init        = gplugd_eth_init,
 };

+struct sdhci_pxa_platdata gplugd_sdh_platdata = {
+       .delay_in_ms = 5,
+       .pxav1_controller = 1,
+};
+
 static void __init select_disp_freq(void)
 {
        /* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */

@@ -188,6 +193,7 @@ static void __init gplugd_init(void)
        platform_device_register(&pxa168_device_gpio);

        pxa168_add_eth(&gplugd_eth_platform_data);
+       pxa168_add_sdh(1, &gplugd_sdh_platdata);
 }

 MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
--

1.7.9.5