[PATCH 3/4] ARM: orion5x: add gigabit ethernet device tree node
From: florian@openwrt.org (Florian Fainelli)
Date: 2013-03-29 18:14:38
Also in:
linux-devicetree, netdev
Subsystem:
the rest · Maintainer:
Linus Torvalds
This patch adds the gigabit ethernet device tree node to orion5x.dtsi. This node is disabled by default and must be enabled on a per-board basis. For completeness and easier testing the MDIO node is also added and disabled by default. Signed-off-by: Florian Fainelli <florian@openwrt.org> --- arch/arm/boot/dts/orion5x.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 8aad00f..8d83220 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi@@ -94,5 +94,28 @@ interrupts = <22>; status = "okay"; }; + + mdio at 72004 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x72004 0x84>; + status = "disabled"; + }; + + ethernet-group at 70000 { + #address-cells = <1>. + #size-cells = <0>; + compatible = "marvell,mv643xx-eth-block"; + reg = <0x70000 0x4000>; + status = "disabled"; + + egiga0: ethernet at 0 { + device_type = "network"; + compatible = "marvell,mv643xx-eth"; + reg = <0>; + interrupts = <21>; + }; + }; }; };
--
1.7.10.4