[PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver · Nishanth Menon <nm@ti.com> · 2013-03-14
[PATCH 1/8] ARM: dts: OMAP34xx: move CPU OPP tables to device tree · Nishanth Menon <nm@ti.com> · 2013-03-14
Re: [PATCH 1/8] ARM: dts: OMAP34xx: move CPU OPP tables to device tree · Jon Hunter <hidden> · 2013-03-14
[PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree · Nishanth Menon <nm@ti.com> · 2013-03-14
Re: [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree · Jon Hunter <hidden> · 2013-03-14
Re: [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree · Nishanth Menon <nm@ti.com> · 2013-03-15
Re: [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree · Jon Hunter <hidden> · 2013-03-15
Re: [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree · Nishanth Menon <nm@ti.com> · 2013-03-15
Re: [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree · Jon Hunter <hidden> · 2013-03-15
Re: [PATCH 2/8] ARM: dts: OMAP36xx: move CPU OPP tables to device tree · Nishanth Menon <nm@ti.com> · 2013-03-15
[PATCH 3/8] ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU · Nishanth Menon <nm@ti.com> · 2013-03-14
[PATCH 4/8] ARM: dts: OMAP443x: move CPU OPP tables to device tree · Nishanth Menon <nm@ti.com> · 2013-03-14
[PATCH 5/8] ARM: dts: omap4-panda: move generic sections to panda-common · Nishanth Menon <nm@ti.com> · 2013-03-14
[PATCH 6/8] ARM: dts: OMAP446x: move CPU OPP tables to device tree · Nishanth Menon <nm@ti.com> · 2013-03-14
Re: [PATCH 6/8] ARM: dts: OMAP446x: move CPU OPP tables to device tree · Jon Hunter <hidden> · 2013-03-14
Re: [PATCH 6/8] ARM: dts: OMAP446x: move CPU OPP tables to device tree · Nishanth Menon <nm@ti.com> · 2013-03-15
[PATCH 7/8] ARM: OMAP3+: use cpu0-cpufreq driver · Nishanth Menon <nm@ti.com> · 2013-03-14
[PATCH 8/8] cpufreq: omap: remove omap-cpufreq · Nishanth Menon <nm@ti.com> · 2013-03-14
Re: [PATCH 8/8] cpufreq: omap: remove omap-cpufreq · Viresh Kumar <viresh.kumar@linaro.org> · 2013-03-15
Re: [PATCH 8/8] cpufreq: omap: remove omap-cpufreq · Nishanth Menon <nm@ti.com> · 2013-03-15
Re: [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver · Jon Hunter <hidden> · 2013-03-14
Re: [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver · Nishanth Menon <nm@ti.com> · 2013-03-15
Re: [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver · Santosh Shilimkar <hidden> · 2013-03-15
Re: [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver · Nishanth Menon <nm@ti.com> · 2013-03-15
Re: [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver · Jon Hunter <hidden> · 2013-03-15
Re: [PATCH 0/8] ARM: OMAP3+: Switch to use DT based cpu0-cpufreq driver · Nishanth Menon <nm@ti.com> · 2013-03-15

[PATCH 6/8] ARM: dts: OMAP446x: move CPU OPP tables to device tree

From: Jon Hunter <hidden>
Date: 2013-03-14 21:49:34
Also in: linux-devicetree, linux-omap, linux-pm

On 03/14/2013 03:58 PM, Nishanth Menon wrote:

OMAP4430 and 4460 have different OPP definitions. So, create an SoC
variant dtsi file for 4460 and move the OPP definitions to it.

FYI, I had to create a similar file for PMU [1]. However, I called it
omap4460.dtsi and not omap446x.dtsi as there is only one omap446x
device. That should go into to v3.10 and so may be worth basing this on
top. I do like your omap4-panda-common.dtsi that is a nice clean-up.

Cheers
Jon

[1]
http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/commit/?h=for_3.10/dts&id=5e64b6b1137a54f353528d6da60071c1ef0043ba

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help