[PATCH v3 4/6] ARM: OMAP: USB: Add phy binding information
From: tony@atomide.com (Tony Lindgren)
Date: 2013-03-20 16:51:58
Also in:
linux-devicetree, linux-omap, lkml
* Kishon Vijay Abraham I [off-list ref] [130320 02:17]:
quoted hunk ↗ jump to hunk
--- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c@@ -265,6 +266,7 @@ static void __init omap_2430sdp_init(void) omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); + phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); board_smc91x_init(); --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c@@ -601,6 +602,7 @@ static void __init omap_3430sdp_init(void) omap_serial_init(); omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); + phy_bind("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
Can't you call phy_bind() from usb_musb_init() with the default values automatically when usb_musb_init() is passed NULL? That way you don't have to patch every board-*.c file with the same lines, and don't need to include <linux/phy/phy.h> in each board-*.c file.
quoted hunk ↗ jump to hunk
--- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c@@ -32,6 +32,7 @@ #include <linux/platform_data/omap4-keypad.h> #include <linux/usb/musb.h> #include <linux/usb/phy.h> +#include <linux/phy/phy.h> #include <asm/mach-types.h> #include <asm/mach/arch.h>@@ -725,6 +726,7 @@ static void __init omap_4430sdp_init(void) omap4_twl6030_hsmmc_init(mmc); usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); + phy_bind("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); usb_musb_init(&musb_board_data); status = omap_ethernet_init();
Here usb_musb_init() gets called with musb_board_data, so keeping the phy_bind() in the board-4430sdp.c can then override the default in usb_musb_init(). Regards, Tony