[PATCH V3 1/7] ARM: OMAP2+: Display correct system timer name
From: Jon Hunter <hidden>
Date: 2013-02-04 19:46:30
Also in:
linux-omap
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
Currently on boot, when displaying the name of the gptimer used for clockevents and clocksource timers, the timer ID is shown. However, when booting with device-tree, the timer ID is not used to select a gptimer but a timer property. Hence, it is possible that the timer selected when booting with device-tree does not match the ID shown. Therefore, instead display the HWMOD name of the gptimer and use the HWMOD name as the name of clockevent and clocksource timer (if a gptimer is used). Signed-off-by: Jon Hunter <redacted> Acked-by: Santosh Shilimkar <redacted> --- arch/arm/mach-omap2/timer.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 72c2ca1..83118fb 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c@@ -129,7 +129,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_gpt = { - .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 300, .set_next_event = omap2_gp_timer_set_next_event,
@@ -214,10 +213,11 @@ static u32 __init omap_dm_timer_get_errata(void) } static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, - int gptimer_id, - const char *fck_source, - const char *property, - int posted) + int gptimer_id, + const char *fck_source, + const char *property, + const char **timer_name, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ const char *oh_name;
@@ -254,6 +254,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (!oh) return -ENODEV; + *timer_name = oh->name; + if (!of_have_populated_dt()) { r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq);
@@ -327,7 +329,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, - OMAP_TIMER_POSTED); + &clockevent_gpt.name, OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev;
@@ -341,8 +343,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, 3, /* Timer internal resynch latency */ 0xffffffff); - pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", - gptimer_id, clkev.rate); + pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name, + clkev.rate); } /* Clocksource code */
@@ -359,7 +361,6 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs) } static struct clocksource clocksource_gpt = { - .name = "gp_timer", .rating = 300, .read = clocksource_read_cycles, .mask = CLOCKSOURCE_MASK(32),
@@ -449,6 +450,7 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, clksrc.errata = omap_dm_timer_get_errata(); res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + &clocksource_gpt.name, OMAP_TIMER_NONPOSTED); BUG_ON(res);
@@ -461,8 +463,8 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, pr_err("Could not register clocksource %s\n", clocksource_gpt.name); else - pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", - gptimer_id, clksrc.rate); + pr_info("OMAP clocksource: %s at %lu Hz\n", + clocksource_gpt.name, clksrc.rate); } #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
--
1.7.10.4