[RFC PATCH 2/6] ARM: OMAP: USB: Add phy binding information
From: Kishon Vijay Abraham I <hidden>
Date: 2013-01-16 15:02:39
Also in:
linux-devicetree, linux-omap, linux-sh, linuxppc-dev, lkml
Subsystem:
arm port, omap usb support, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
This is in preparation for the changes in PHY library to support adding and getting multiple PHYs of the same type. In the new design, the binding information between the PHY and the USB controller should be specified in the platform specific initialization code. So it's been done for OMAP platforms here. Signed-off-by: Kishon Vijay Abraham I <redacted> --- This kind-of binding should be done in all the platforms (I've done only for OMAP platform). arch/arm/mach-omap2/usb-musb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 9d27e3f..bbe2fa5 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c@@ -24,6 +24,7 @@ #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/usb/musb.h> +#include <linux/usb/phy.h> #include "omap_device.h" #include "soc.h"
@@ -85,8 +86,12 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (cpu_is_omap44xx()) + if (cpu_is_omap44xx()) { musb_plat.has_mailbox = true; + usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); + } else if (cpu_is_omap34xx()) { + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); + } if (soc_is_am35xx()) { oh_name = "am35x_otg_hs";
--
1.7.9.5