[PATCH v3 2/3] ARM/dts: omap3: Add support for IGEPv2 board
From: Javier Martinez Canillas <hidden>
Date: 2012-12-03 12:42:44
Also in:
linux-devicetree, linux-omap, lkml
Subsystem:
arm and arm64 soc sub-architectures (common parts), the rest · Maintainers:
Arnd Bergmann, Krzysztof Kozlowski, Alexandre Belloni, Linus Walleij, Linus Torvalds
ISEE IGEPv2 is an TI OMAP3 SoC based embedded board.
This patch adds an initial device tree support to boot
an IGEPv2 from the MMC/SD.
Currently is working everything that is supported by DT
on OMAP3 SoCs (MMC/SD, GPIO LEDs, EEPROM, TWL4030 audio).
Signed-off-by: Javier Martinez Canillas <redacted>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
---
Changes since v1:
- Use default-state = "on" instead default-trigger = "default-on" for LED
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap3-igep0020.dts | 56 ++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3-igep0020.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9f..1dc0f39 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile@@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ + omap3-igep0020.dtb \ omap4-panda.dtb \ omap4-pandaES.dtb \ omap4-var_som.dtb \
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
new file mode 100644
index 0000000..e2b9849
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0020.dts@@ -0,0 +1,56 @@ +/* + * Device Tree Source for IGEPv2 board + * + * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "omap3-igep.dtsi" + +/ { + model = "IGEPv2"; + compatible = "isee,omap3-igep0020", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + boot { + label = "omap3:green:boot"; + gpios = <&gpio1 26 0>; + default-state = "on"; + }; + + user0 { + label = "omap3:red:user0"; + gpios = <&gpio1 27 0>; + default-state = "off"; + }; + + user1 { + label = "omap3:red:user1"; + gpios = <&gpio1 28 0>; + default-state = "off"; + }; + + user2 { + label = "omap3:green:user1"; + gpios = <&twl_gpio 19 1>; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in the EEPROM + * as EDID data. + */ + eeprom at 50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +};
--
1.7.7.6