[PATCH 1/2] regulator: gpio-regulator: doc: Fix wrong key gpio-enable
From: Frank Li <hidden>
Date: 2012-11-12 09:58:28
Subsystem:
open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
Wrong description in binding document. Doc use "gpio-enable", but code use "enable-gpio" In drivers/regulator/gpio-regulator.c config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); Signed-off-by: Frank Li <redacted> --- .../bindings/regulator/gpio-regulator.txt | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
index 3703be2..f71f808 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt@@ -4,7 +4,7 @@ Required properties: - compatible : Must be "regulator-gpio". Optional properties: -- gpio-enable : GPIO to use to enable/disable the regulator. +- enable-gpio : GPIO to use to enable/disable the regulator. - gpios : GPIO group used to control voltage. - states : Selection of available voltages and GPIO configs. - startup-delay-us : Startup time in microseconds.
@@ -23,7 +23,7 @@ Example: regulator-max-microvolt = <2600000>; regulator-boot-on; - gpio-enable = <&gpio0 23 0x4>; + enable-gpio = <&gpio0 23 0x4>; gpios = <&gpio0 24 0x4 &gpio0 25 0x4>; states = <1800000 0x3
--
1.7.1