[PATCH v3 1/5] rtc: OMAP: Add system pm_power_off to rtc driver
From: Bedia, Vaibhav <hidden>
Date: 2012-11-26 05:19:24
Also in:
linux-devicetree, linux-omap
Possibly related (same subject, not in this thread)
- 2012-12-11 · Re: [PATCH v3 1/5] rtc: OMAP: Add system pm_power_off to rtc driver · Grant Likely <hidden>
- 2012-11-22 · RE: [PATCH v3 1/5] rtc: OMAP: Add system pm_power_off to rtc driver · AnilKumar, Chimata <hidden>
- 2012-11-20 · [PATCH v3 1/5] rtc: OMAP: Add system pm_power_off to rtc driver · AnilKumar Ch <hidden>
On Thu, Nov 22, 2012 at 11:17:02, AnilKumar, Chimata wrote:
+Andrew Morton On Tue, Nov 20, 2012 at 15:18:43, AnilKumar, Chimata wrote:quoted
From: Colin Foe-Parker <redacted> Add system power off control to rtc driver which is the in-charge of controlling the BeagleBone system power. The power_off routine can be hooked up to "pm_power_off" system call. System power off sequence:- * Set PMIC STATUS_OFF when PMIC_POWER_EN is pulled low * Enable PMIC_POWER_EN in rtc module * Set rtc ALARM2 time * Enable ALARM2 interrupt Added while (1); after the above steps to make sure that no other process acquire cpu. Otherwise we might see an unexpected behaviour because we are shutting down all the power rails of SoC except RTC.
Reviewed-by: Vaibhav Bedia <redacted>