On Wed, Nov 14, 2012 at 23:38:22, AnilKumar, Chimata wrote:

This patch series adds d_can raminit support to c_can/d_can driver,
which is required to init/de-init D_CAN message RAM (holds message
objects). Added corresponding DT changes to get resource of RAMINIT
register and device instance.

These patches were tested on AM335x-EVM along with pinctrl data addition
patch, which is not added to am335x-evm.dts (only supports CPLD profile#0)
because d_can1 is supported under CPLD profile#1.

Hi Mark,

Gentle remainder to this series

Thanks
AnilKumar
 

AnilKumar Ch (3):
  can: c_can: Add d_can raminit support
  ARM: dts: AM33XX: Add d_can instances to aliases
  ARM: dts: AM33XX: Add memory resource to d_can node

 arch/arm/boot/dts/am33xx.dtsi          |    8 ++++++--
 drivers/net/can/c_can/c_can.c          |   12 +++++++++++
 drivers/net/can/c_can/c_can.h          |    3 +++
 drivers/net/can/c_can/c_can_platform.c |   34 +++++++++++++++++++++++++++++++-
 4 files changed, 54 insertions(+), 3 deletions(-)

-- 
1.7.9.5