[PATCH 00/10] ARM: dts: AM33XX: Add device tree data
From: AnilKumar, Chimata <hidden>
Date: 2012-11-06 04:33:44
Also in:
linux-devicetree, linux-omap
From: AnilKumar, Chimata <hidden>
Date: 2012-11-06 04:33:44
Also in:
linux-devicetree, linux-omap
On Mon, Nov 05, 2012 at 22:07:45, Cousson, Benoit wrote:
Hi Anil, On 11/05/2012 02:46 PM, AnilKumar, Chimata wrote:quoted
On Mon, Nov 05, 2012 at 16:15:40, AnilKumar, Chimata wrote:quoted
Add device tree date for GPIO based various drivers matrix keypad, volume keys, push buttons and use leds accross three AM33XX devices viz EVM, BeagleBone and Starter Kit. To make it functional this series also adds pinctrl data for all the GPIOs used by various drivers. In this series only default state pinmux/conf settings are added because of sleep/idle state pinctrl values are not available. These patches are based on linux-omap-dt:for_3.8/dts tree and theseMy bad, small correction in this statement, these patches apply cleanly on linux-omap-dt:for_3.8/dts tree with the below two patches. http://www.spinics.net/lists/arm-kernel/msg204872.html http://www.spinics.net/lists/arm-kernel/msg204873.htmlMmm, this 2 patches do have dependency on some driver changes that might not be accepted for 3.8. And in fact I do have some comment on the RTC one :-) Don't you prefer to change the order to allow me to pull these ones first?
Today I will resend the patches by removing this dependency. Thanks AnilKumar