Thread (7 messages) 7 messages, 4 authors, 2012-10-29
STALE4994d

[PATCH] ARM: AM33xx: add support for reboot

From: zonque@gmail.com (Daniel Mack)
Date: 2012-10-28 19:19:19
Also in: linux-omap

[Cc Tony]

On 28.10.2012 19:17, Daniel Mack wrote:
This patch adds the ability to reboot am33xx-based systems.
Sorry, I lacked to investigate on the attribution here. According to
"git blame" of a BSP kernel I got these lines from, the original author
is Afzal Mohammed.

Afzal, are you planning to resubmit this for mainline? My version can of
course be disposed then.


Thanks,
Daniel



quoted hunk ↗ jump to hunk
Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 arch/arm/mach-omap2/board-generic.c | 1 +
 arch/arm/mach-omap2/prcm.c          | 6 ++++++
 2 files changed, 7 insertions(+)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 601ecdf..6a69ceb 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -114,6 +114,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
 	.init_machine	= omap_generic_init,
 	.timer		= &omap3_am33xx_timer,
 	.dt_compat	= am33xx_boards_compat,
+	.restart	= omap_prcm_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 0f51e03..8a3068a 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -32,6 +32,7 @@
 #include "clock2xxx.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
+#include "prm33xx.h"
 #include "prm44xx.h"
 #include "prminst44xx.h"
 #include "cminst44xx.h"
@@ -72,6 +73,11 @@ void omap_prcm_restart(char mode, const char *cmd)
 		omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
 	} else if (cpu_is_omap44xx()) {
 		omap4_prminst_global_warm_sw_reset(); /* never returns */
+	} else if (soc_is_am33xx()) {
+		prcm_offs = AM33XX_PRM_DEVICE_MOD;
+		omap2_prm_set_mod_reg_bits(OMAP4430_RST_GLOBAL_COLD_SW_MASK,
+					   prcm_offs,
+					   AM33XX_PRM_RSTCTRL_OFFSET);
 	} else {
 		WARN_ON(1);
 	}
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help