[RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod

Paul Walmsley [off-list ref] writes:

Hi Tero,

On Mon, 22 Oct 2012, Tero Kristo wrote:

quoted

When waking up from off-mode, some IP blocks are reset automatically by
hardware. For this reason, software must wait until the reset has
completed before attempting to access the IP block.

This patch fixes for example the bug introduced by commit
6c31b2150ff96755d24e0ab6d6fea08a7bf5c44c ("mmc: omap_hsmmc: remove access
to SYSCONFIG register"), in which the MMC IP block is reset during
off-mode entry, but the code expects the module to be already available
during the execution of context restore.

Signed-off-by: Tero Kristo <redacted>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <redacted>
Cc: Venkatraman S <redacted>

What do you think about these modifications?  The code is quite similar to 
what was in the _ocp_softreset() function, so just moved it into a 
function.  Also moved the callsite from the end of _enable_sysc() to the 
beginning, which makes more sense to me, but would like to get your 
opinion.

FYI, after some more testing with this patch, I noticed that this patch
(and the original from Tero) cause some sluggishness on UART1 console my
37xx/EVM platform as soon as off-mode is enabled (even without the UART
autosuspend timeouts enabled.)  I don't see this on any other OMAP3
platform but all the others I have have UART3 console (in PER), the EVM
is the only one with UART1 console (in CORE.)

I haven't debugged this any furhter, but thought it should be reported
before this gets merged.

Kevin