[PATCH 6/6] ARM: EXYNOS5: SATA PHY controller driver
From: Tomasz Figa <hidden>
Date: 2012-10-12 22:50:27
Also in:
linux-ide, linux-samsung-soc
Hi, On Tuesday 09 of October 2012 17:18:52 Vasanth Ananthan wrote:
quoted hunk ↗ jump to hunk
This patch adds a platform driver and I2C client driver for SATA PHY controller Signed-off-by: Vasanth Ananthan <redacted> --- drivers/ata/Makefile | 2 +- drivers/ata/sata_exynos_phy.c | 303 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 304 insertions(+), 1 deletions(-) create mode 100644 drivers/ata/sata_exynos_phy.cdiff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 33fb2f6..769d945 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile@@ -9,7 +9,7 @@ obj-$(CONFIG_SATA_FSL) += sata_fsl.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o -obj-$(CONFIG_SATA_EXYNOS) += sata_phy.o sata_exynos.olibahci.o +obj-$(CONFIG_SATA_EXYNOS) += sata_phy.o sata_exynos_phy.o sata_exynos.o libahci.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.odiff --git a/drivers/ata/sata_exynos_phy.cb/drivers/ata/sata_exynos_phy.c new file mode 100644 index 0000000..44861de--- /dev/null +++ b/drivers/ata/sata_exynos_phy.c@@ -0,0 +1,303 @@ +/* + * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - SATA PHY controller driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/ahci_platform.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/list.h> + +#include <plat/cpu.h> + +#include <mach/irqs.h> +#include <mach/map.h> +#include <mach/regs-pmu.h> +#include <mach/regs-sata.h> + +#include "sata_phy.h" + +#define SATA_TIME_LIMIT 1000 + +static struct i2c_client *i2c_client; + +static struct i2c_driver sataphy_i2c_driver; + +struct exynos_sata_phy { + void __iomem *mmio; + struct resource *mem; + struct clk *clk; +}; + +static bool sata_is_reg(void __iomem *base, u32 reg, u32 checkbit, u32 Status) +{
Please use lowercase for variable names.
+ if ((readl(base + reg) & checkbit) == Status) + return true; + else + return false; +} + +static bool wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit, + u32 Status)
Same here.
+{
+ u16 time_limit_cnt = 0;
+ while (!sata_is_reg(base, reg, checkbit, Status)) {
+ if (time_limit_cnt == SATA_TIME_LIMIT)
+ return false;
+ udelay(1000);
+ time_limit_cnt++;
+ }
+ return true;
+}
+
+int sataphy_init(struct sata_phy *phy)static int sataphy_init(struct sata_phy *phy) ?
+{
+ int ret;
+ u32 val;
+
+ /* Values to be written to enable 40 bits interface */
+ u8 buf[] = { 0x3A, 0x0B };
+
+ struct exynos_sata_phy *sata_phy;
+
+ sata_phy = (struct exynos_sata_phy *)phy->priv_data;
+
+ clk_enable(sata_phy->clk);
+
+ writel(S5P_PMU_SATA_PHY_CONTROL_EN, EXYNOS5_SATA_PHY_CONTROL);
+
+ val = 0;
+ writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET);
+ val |= 0xFF;
+ writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET);
+ val |= LINK_RESET;
+ writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET);
+ val |= RESET_CMN_RST_N;
+ writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->mmio + EXYNOS5_SATA_PHSATA_CTRLM);
+ val &= ~PHCTRLM_REF_RATE;
+ writel(val, sata_phy->mmio + EXYNOS5_SATA_PHSATA_CTRLM);
+
+ /* High speed enable for Gen3 */
+ val = readl(sata_phy->mmio + EXYNOS5_SATA_PHSATA_CTRLM);
+ val |= PHCTRLM_HIGH_SPEED;
+ writel(val, sata_phy->mmio + EXYNOS5_SATA_PHSATA_CTRLM);
+
+ val = readl(sata_phy->mmio + EXYNOS5_SATA_CTRL0);
+ val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED;
+ writel(val, sata_phy->mmio + EXYNOS5_SATA_CTRL0);
+
+ writel(SATA_PHY_GENERATION3, sata_phy->mmio + EXYNOS5_SATA_MODE0);
+
+ ret = i2c_master_send(i2c_client, buf, sizeof(buf));
+ if (ret < 0)
+ return -EINVAL;
+
+ /* release cmu reset */
+ val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET);
+ val &= ~RESET_CMN_RST_N;
+ writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->mmio + EXYNOS5_SATA_RESET);
+ val |= RESET_CMN_RST_N;
+ writel(val, sata_phy->mmio + EXYNOS5_SATA_RESET);
+
+ if (wait_for_reg_status(sata_phy->mmio, EXYNOS5_SATA_PHSATA_STATM,
+ PHSTATM_PLL_LOCKED, 1)) {
+ return 0;
+ }
+ return -EINVAL;
+}
+
+int sataphy_shutdown(struct sata_phy *phy)static int sataphy_shutdown(struct sata_phy *phy) ?
+{
+
+ struct exynos_sata_phy *sata_phy;
+
+ sata_phy = (struct exynos_sata_phy *)phy->priv_data;
+
+ clk_disable(sata_phy->clk);
+
+ return 0;
+}
+
+static int sata_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *i2c_id)
+{
+ i2c_client = client;
+ return 0;
+}
+
+static int __init sata_phy_probe(struct platform_device *pdev)
+{
+ struct exynos_sata_phy *sataphy;
+ struct sata_phy *phy;
+ struct resource *res;
+ int ret = 0;
+
+ phy = kzalloc(sizeof(struct sata_phy), GFP_KERNEL);devm_
+ if (!phy) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ sataphy = kzalloc(sizeof(struct exynos_sata_phy), GFP_KERNEL);devm_
+ if (!sataphy) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Could not find IO resource\n");
+ ret = -EINVAL;
+ goto err1;
+ }
+
+ sataphy->mem = request_mem_region(res->start, resource_size(res),
+ pdev->name);devm_
+ if (!sataphy->mem) {
+ dev_err(&pdev->dev, "Could not request IO resource\n");
+ ret = -EINVAL;
+ goto err1;
+ }
+
+ sataphy->mmio =
+ ioremap(res->start, resource_size(res));devm_
+
nitpick: Unnecessary blank line.
+ if (!sataphy->mmio) {
+ dev_err(&pdev->dev, "failed to remap IO\n");
+ ret = -ENOMEM;
+ goto err2;
+ }
+
+ sataphy->clk = clk_get(&pdev->dev, "sata_phy");devm_
+ if (IS_ERR(sataphy->clk)) {
+ dev_err(&pdev->dev, "failed to get clk for PHY\n");
+ ret = PTR_ERR(sataphy->clk);
+ sataphy->clk = NULL;
+ goto err3;
+ }
+
+ phy->init = sataphy_init;
+ phy->shutdown = sataphy_shutdown;
+ phy->priv_data = (void *)sataphy;
+ phy->dev = &pdev->dev;
+
+ ret = sata_add_phy(phy, SATA_PHY_GENERATION3);
+ if (ret < 0)
+ goto err4;Do you have any warranties that phy callbacks won't get called before i2c device probes and sets i2c_client?
+
+ ret = i2c_add_driver(&sataphy_i2c_driver);
+ if (ret < 0)
+ goto err5;
+
+ platform_set_drvdata(pdev, phy);
+
+ return ret;
+
+ err5:
+ sata_remove_phy(phy);
+
+ err4:
+ clk_put(sataphy->clk);
+
+ err3:
+ iounmap(sataphy->mmio);
+
+ err2:
+ release_resource(sataphy->mem);
+
+ err1:
+ kfree(sataphy);
+
+ err0:
+ kfree(phy);
+
+ out:
+ return ret;
+}
+
+static int sata_phy_remove(struct platform_device *pdev)
+{
+ struct sata_phy *phy;
+ struct exynos_sata_phy *sataphy;
+
+ phy = platform_get_drvdata(pdev);
+
+ sataphy = (struct exynos_sata_phy *)phy->priv_data;
+ sata_remove_phy(phy);
+
+ iounmap(sataphy->mmio);
+
+ release_resource(sataphy->mem);
+
+ clk_disable(sataphy->clk);
+ clk_put(sataphy->clk);
+
+ kfree(sataphy);
+ kfree(phy);
+
+ return 0;
+}
+
+static const struct of_device_id sata_phy_of_match[] = {
+ {.compatible = "samsung,exynos-sata-phy",},nitpick: Space after opening and before closing brackets.
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, sata_phy_of_match);
+
+static const struct i2c_device_id phy_i2c_device_match[] = {
+ {"sataphy", 0},Same here.
+};
+
+MODULE_DEVICE_TABLE(of, phy_i2c_device_match);
+
+static struct platform_driver sata_phy_driver = {
+ .probe = sata_phy_probe,
+ .remove = sata_phy_remove,
+ .driver = {
+ .name = "sata-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = sata_phy_of_match,
+ },nitpick: Wrong indentation of closing bracket.
+};
+
+static struct i2c_driver sataphy_i2c_driver = {
+ .driver = {
+ .name = "i2c-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = phy_i2c_device_match,
+ },nitpick: Wrong indentation of closing bracket. Best regards, Tomasz Figa