[PATCH v2 1/4] net: mvneta: driver for Marvell Armada 370/XP network unit
flat view
STALE5116d
From: Rob Herring <hidden>
Date: 2012-10-11 15:46:57
Also in:
netdev
On 10/11/2012 10:27 AM, Thomas Petazzoni wrote:
This patch contains a new network driver for the network unit of the ARM Marvell Armada 370 and the Armada XP. Both SoCs use the PJ4B processor, a Marvell-developed ARM core that implements the ARMv7 instruction set.
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/net/marvell-neta.txt b/Documentation/devicetree/bindings/net/marvell-neta.txt new file mode 100644 index 0000000..a031978 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-neta.txt@@ -0,0 +1,24 @@ +* Marvell Armada 370 / Armada XP Ethernet Controller (NETA) + +Required properties: +- compatible: should be "marvell,neta".
This should be more specific such as "marvell,armada-xp-neta". Or use 370 instead of xp. It should be which ever chip came first.
quoted hunk ↗ jump to hunk
+- reg: address and length of the register set for the device. +- interrupts: interrupt for the device +- phy-mode: String, operation mode of the PHY interface. Supported + values are "sgmii" and "rmii". +- phy-addr: Integer, address of the PHY. +- device_type: should be "network".
Drop this. device_type is not used for FDT.
quoted hunk ↗ jump to hunk
+- clock-frequency: frequency of the peripheral clock of the SoC. + +Example: + +eth at d0070000 {
Should be ethernet at ... Rob