[PATCH] ARM: dts: imx6q-sabreauto: Add basic support
From: Shawn Guo <hidden>
Date: 2012-10-06 13:03:46
On Tue, Sep 25, 2012 at 08:16:58PM -0300, Fabio Estevam wrote:
From: Fabio Estevam <redacted> mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <redacted> --- Documentation/devicetree/bindings/arm/fsl.txt | 4 ++ arch/arm/boot/dts/imx6q-sabreauto.dts | 65 +++++++++++++++++++++++++
Add imx6q-sabreauto.dtb into arch/arm/boot/dts/Makefile.
quoted hunk ↗ jump to hunk
2 files changed, 69 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-sabreauto.dtsdiff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index ac9e751..f798187 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt@@ -41,6 +41,10 @@ i.MX6 Quad SABRE Smart Device Board Required root node properties: - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; +i.MX6 Quad SABRE Automotive Board +Required root node properties: + - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; + Generic i.MX boards -------------------diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts new file mode 100644 index 0000000..d18d25e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts@@ -0,0 +1,65 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6Q Sabre Automotive Board";
s/i.MX6Q Sabre/i.MX6 Quad SABRE, to align with imx6q-sabrelite.dts?
+ compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ soc {
+ aips-bus at 02000000 { /* AIPS1 */
+Drop the new line.
+ iomuxc at 020e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
+ 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
+ >;
+ };
+ };
+ };
+ };
+
+ aips-bus at 02100000 { /* AIPS2 */
+ uart4: serial at 021f0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
+ status = "okay";
+ };
+
+ ethernet at 02188000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_2>;
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+
+ usdhc at 02198000 { /* uSDHC3 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
+ cd-gpios = <&gpio6 15 0>;
+ wp-gpios = <&gpio1 13 0>;
+ status = "okay";
+ };
+ };
+ };
+};
--
1.7.9.5