[PATCH 02/16] ARM: OMAP: Split plat-omap/i2c.c into mach-omap1 and mach-omap2

From
Shubhrajyoti <hidden>
Date
2012-10-05 08:53:30
Also in
linux-omap
Reply to
Tony Lindgren, 2012-10-04
On Friday 05 October 2012 03:34 AM, Tony Lindgren wrote:
There's no need to keep the device related things in the
common i2c.c as omap2+ is using hwmod. Split the code to
mach-omap1 and mach-omap2 parts and only leave common
code to plat-omap/i2c.c.

Note that as omap1 only has one i2c controller, we can
now remove the old device related macros.
Reviewed-by: Shubhrajyoti D <redacted>
quoted hunk ↗ jump to hunk
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/common.h               |    3 +
 arch/arm/mach-omap1/i2c.c                  |   59 +++++++++++
 arch/arm/mach-omap2/board-rm680.c          |    1 
 arch/arm/mach-omap2/common.h               |    4 +
 arch/arm/mach-omap2/i2c.c                  |   72 +++++++++++++
 arch/arm/mach-omap2/i2c.h                  |   25 +----
 arch/arm/mach-omap2/omap_hwmod_2420_data.c |    4 +
 arch/arm/mach-omap2/omap_hwmod_2430_data.c |    4 +
 arch/arm/mach-omap2/omap_hwmod_33xx_data.c |    4 +
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c |    4 +
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    3 -
 arch/arm/mach-omap2/twl-common.c           |    1 
 arch/arm/plat-omap/i2c.c                   |  152 +---------------------------
 arch/arm/plat-omap/i2c.h                   |   46 ++++++++
 arch/arm/plat-omap/include/plat/common.h   |    1 
 15 files changed, 202 insertions(+), 181 deletions(-)
 rename arch/arm/{plat-omap/include/plat/i2c.h => mach-omap2/i2c.h} (66%)
 create mode 100644 arch/arm/plat-omap/i2c.h
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index c2552b2..306b7ac 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -28,6 +28,9 @@
 
 #include <plat/common.h>
 #include <linux/mtd/mtd.h>
+#include <linux/i2c-omap.h>
+
+#include "../plat-omap/i2c.h"
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index a0551a6..a6f465a 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -19,11 +19,25 @@
  *
  */
 
-#include <plat/i2c.h>
+#include <linux/i2c-omap.h>
 #include <mach/mux.h>
 #include <plat/cpu.h>
 
-void __init omap1_i2c_mux_pins(int bus_id)
+#include "../plat-omap/i2c.h"
+
+#define OMAP_I2C_SIZE		0x3f
+#define OMAP1_I2C_BASE		0xfffb3800
+#define OMAP1_INT_I2C		(32 + 4)
+
+static const char name[] = "omap_i2c";
+
+static struct resource i2c_resources[2] = {
+};
+
+static struct platform_device omap_i2c_devices[1] = {
+};
+
+static void __init omap1_i2c_mux_pins(int bus_id)
 {
 	if (cpu_is_omap7xx()) {
 		omap_cfg_reg(I2C_7XX_SDA);
@@ -33,3 +47,44 @@ void __init omap1_i2c_mux_pins(int bus_id)
 		omap_cfg_reg(I2C_SCL);
 	}
 }
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
+				int bus_id)
+{
+	struct platform_device *pdev;
+	struct resource *res;
+
+	omap1_i2c_mux_pins(bus_id);
+
+	pdev = &omap_i2c_devices[bus_id - 1];
+	pdev->id = bus_id;
+	pdev->name = name;
+	pdev->num_resources = ARRAY_SIZE(i2c_resources);
+	res = i2c_resources;
+	res[0].start = OMAP1_I2C_BASE;
+	res[0].end = res[0].start + OMAP_I2C_SIZE;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = OMAP1_INT_I2C;
+	res[1].flags = IORESOURCE_IRQ;
+	pdev->resource = res;
+
+	/* all OMAP1 have IP version 1 register set */
+	pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+	/* all OMAP1 I2C are implemented like this */
+	pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+		       OMAP_I2C_FLAG_SIMPLE_CLOCK |
+		       OMAP_I2C_FLAG_16BIT_DATA_REG |
+		       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+	/* how the cpu bus is wired up differs for 7xx only */
+
+	if (cpu_is_omap7xx())
+		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+	else
+		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
+	pdev->dev.platform_data = pdata;
+
+	return platform_device_register(pdev);
+}
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 45997bf..a57ed21 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <plat/i2c.h>
 #include <plat/mmc.h>
 #include <plat/usb.h>
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 7045e4d..a68b421 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -28,7 +28,9 @@
 
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/i2c/twl.h>
+#include <linux/i2c-omap.h>
 
 #include <asm/proc-fns.h>
 
@@ -36,6 +38,8 @@
 #include <plat/serial.h>
 #include <plat/common.h>
 
+#include "i2c.h"
+
 #define OMAP_INTC_START		NR_IRQS
 
 #ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index fc57e67..b15416c 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,11 +19,15 @@
  *
  */
 
-#include <plat/i2c.h>
+#include <linux/i2c-omap.h>
+
 #include "common.h"
 #include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
 
 #include "mux.h"
+#include "i2c.h"
 
 /* In register I2C_CON, Bit 15 is the I2C enable bit */
 #define I2C_EN					BIT(15)
@@ -33,7 +37,9 @@
 /* Maximum microseconds to wait for OMAP module to softreset */
 #define MAX_MODULE_SOFTRESET_WAIT	10000
 
-void __init omap2_i2c_mux_pins(int bus_id)
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN	16
+
+static void __init omap2_i2c_mux_pins(int bus_id)
 {
 	char mux_name[sizeof("i2c2_scl.i2c2_scl")];
 
@@ -104,3 +110,65 @@ int omap_i2c_reset(struct omap_hwmod *oh)
 
 	return 0;
 }
+
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+	omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
+static const char name[] = "omap_i2c";
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+				int bus_id)
+{
+	int l;
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+	char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
+	struct omap_i2c_bus_platform_data *pdata;
+	struct omap_i2c_dev_attr *dev_attr;
+
+	omap2_i2c_mux_pins(bus_id);
+
+	l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
+	WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
+		"String buffer overflow in I2C%d device setup\n", bus_id);
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+			pr_err("Could not look up %s\n", oh_name);
+			return -EEXIST;
+	}
+
+	pdata = i2c_pdata;
+	/*
+	 * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+	 * use, and functionality implementation flags, up to the OMAP I2C
+	 * driver via platform data
+	 */
+	pdata->rev = oh->class->rev;
+
+	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+	pdata->flags = dev_attr->flags;
+
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 * Only omap3 has support for constraints
+	 */
+	if (cpu_is_omap34xx())
+		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
this part is touched by Jean also so maybe one of the patch has to be
rebased.
+	pdev = omap_device_build(name, bus_id, oh, pdata,
Thread (36 messages) 36 messages, 8 authors, last reply 2012-10-26
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help