[PATCH 2/2] ARM: bcm2835: enable GPIO/pinctrl
From: Stephen Warren <hidden>
Date: 2012-10-26 02:50:58
Also in:
linux-devicetree
Possibly related (same subject, not in this thread)
- 2012-09-28 · Re: [PATCH 2/2] ARM: bcm2835: enable GPIO/pinctrl · Linus Walleij <hidden>
- 2012-09-28 · [PATCH 2/2] ARM: bcm2835: enable GPIO/pinctrl · Stephen Warren <hidden>
On 09/27/2012 10:10 PM, Stephen Warren wrote:
Enable GPIO and pinctrl in Kconfig. Add required <mach/gpio.h> for gpiolib. Instantiate the BCM2835 GPIO module in bcm2835.dtsi. Add a pinctrl definition to bcm2835-rpi-b.dts that sets up all of the board's required pinmux configuration. GPIO aren't specified; that's left to gpio_request().
Applied to rpi's for-3.8/soc branch.