[PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update

On Wed, Oct 24, 2012 at 04:05:45PM +0200, Gregory CLEMENT wrote:

On 10/24/2012 04:01 PM, Thomas Petazzoni wrote:

quoted

Hello,

Shouldn't you split into one commit adding the SATA definition in
the .dtsi + doing the defconfig change (the "SoC" level modifications),
and then another commit for the .dts change? I don't really care
personally, it's really up to Jason/Andrew on this.

Another comment below, though.

On Wed, 24 Oct 2012 15:49:21 +0200, Gregory CLEMENT wrote:

quoted

diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 94b4b9e..3f08233 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi

@@ -69,6 +69,16 @@
 			compatible = "marvell,armada-addr-decoding-controller";
 			reg = <0xd0020000 0x258>;
 		};
+
+		sata at d00a0000 {
+                        compatible = "marvell,orion-sata";
+                        reg = <0xd00a0000 0x2400>;
+                        interrupts = <55>;
+                        nr-ports = <2>;
+			clocks = <&coreclk 0>;//,  <&coreclk 0>;

Alignment problem + remainings of tests or something like that.

True I missed this one.

Jason, Andrew, do you want I split this patch as suggested by Thomas or
are you fine with having one single patch?

Yes, please make the defconfig changes a separate patch.  Also, please
make sure only the minimum is enabled (eq RAID... isn't needed).

thx,

Jason.